9' 2" Cedar Glide Performance Longboard

Dimensions:
9' 2" Long x 22.5" W  x 3" Thick
(279.4 cm x 57.2 cm x 7.6 cm)

   This performance longboard is based off an old Takayama D-2 that I used to have.  I loved it but it was too light for my liking, so I modded it a bit and came up with this gem!  It has a modern outline, down turned rails with harder rails towards the back, and a nice spoon nose to top it off makes this a slick little nose rider as well as a good performer.  With a modest entry rocker and a distinct kick in the tail.  This is my "go to" board for most conditions.  This board usually weighs about 22 lbs when finished, but weight can vary depending on your wood selection.

About our plans        What Do I Need?      What's Inside?         FAQs




 



 

 Instant Download!
Performance Longboard
Plans & Manual

$25
Pay Securely
Using Credit Card or PayPal
Shipped to your door!
Performance Longboard
Plans PRINTED

$45
Pay Securely
Using Credit Card or PayPal

 


  Start building your own Wooden PaddleBoard or surfboard TODAY!  My plans are the easiest to build and the board is almost finished  when assembled!  After assembly you will just trim and shape the outer edges.  Don't waste your time and money on cheap-o plans that make flat, featureless logs, or complicated plans with a billion tiny pieces.  My plans feature domed decks, spoon nose option and Vee-tails in the performance boards.  AND they are easy to build with just 4 triangle strips per side!

  See why I sold thousands and helped people all over the world build and ride their own surf craft!  I also offer FREE REAL-TIME email help and can usually answer within the hour (I get instant alerts!)

  Join the community and share your project pics on our Builder's Forum.  Get attention at the beach showing off your new work of art! 

Click to BUY IT NOW and get started on your project! 

 You get:
THE COMPLETE builder's manual

BLUEPRINTS
FREE REAL-TIME help from the author
Online support from our Builder's Forum

 

Build Your Own

   Now you CAN build your own.   I have refined my blueprints to be user friendly, having the rail layout pre-drawn and the concave option all laid out.  Just print them out, paste them on, and cut out the pieces!   Need extra help?  I have put together a complete manual to accompany these plans, which covers rocker jig setup, ripping jigs, and some do's and don'ts to make the build easier for the first time builder.  This book is in PDF Format and will be emailed to you.  You need Acrobat Reader, which is on most all computers, or download it free here.